Insulated FR Jacket Journeyman 300D Trilobal Rip-Stop - 3907FRWJ

As low as CA$121.50 Regular Price CA$151.90
In stock
SKU
3907FRWJ

Product Description

Insulated FR Jacket Journeyman 300D Trilobal Rip-Stop - 3907FRWJ Available in the colour black Located in Kitimat British Columbia

Insulated FR Jacket Journeyman 300D Trilobal Rip-Stop - 3907FRWJ

Available in the colour black

These garments are not intended as protection from Hydrocarbon Flash Fires, Electric Arc Hazards or welding sparks as they are only sufficient for entry level flame resistant protection.
This clothing should only be used for rain wear or to protect the more expensive FR garments underneath from substances like paint, cement and oil and grease just to name a few examples.
Also a person still has to wear flame resistant clothing under as a base layer that has an arc rating for the exposure and hazard risk.
Located in Kitimat B.C.

Product Highlight

Key Features
  • Heavy-duty FR-treated 300 denier Trilobal rip-stop polyester with PU backing gives superior abrasion, puncture, rip and snag resistance
  • 125 gsm ThermoMAXX® Insulation good up to -30°C / -22°F
  • FR-treated inner lining
  • Waterproof, and windproof
Technology
  • Insulated Stormblaster® hood reduces wind and rain exposure up the back of the jacket, while orienting the front close to the chin and cheek area. It has a safety tear away design, making it easy to remove and attach.
  • Heavy-duty FR-treated 300 denier Trilobal rip-stop polyester with PU backing gives superior abrasion, puncture, rip and snag resistance
  • 125 gsm ThermoMAXX® Insulation good up to -30°C / -22°F
Safety standards
  • Fully compliant with CSA Z96-15 Class 1, Level 2
  • Fully compliant with ANSI/ISEA 107-2015 Type O, Class 1, ASTM D6413 (FR)
  • Tested in accordance with test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 flame resistance, self-extinguishing for momentary contact with open flame
  • 2" Vi-brance® reflective material in 4" contrasting tape meets WCB/Worksafe/DOT configuration
Ideal
  • Foul weather protection as well as a thermal layer in industries requiring FR compliance on site
  • Freezer workers
  • Insulated Stormblaster® hood reduces wind and rain exposure up the back of the jacket, while orienting the front close to the chin and cheek area. It has a safety tear away design, making it easy to remove and attach.
  • Heavy-duty zipper with storm flap for weather protection
  • Dual reflective chest straps
  • Double stitched tape and background for superior durability
  • 14" embroidery zipper included
  • Front and back vents for extra breathability
  • 2 Large zippered pockets on the outside, and 1 inner chest pocket
  • Adjustable wrist with hook-and-loop fastener to seal out rain and wind



SIZING CONVERSION CHART

Size Small Medium Large XL 2XL 3XL 4XL
Chest* 37 40 43 47 51 55 58
Waist* 30 33 36 39 42 45 48
Hips 37 40 43 46 49 52 55


If unsure of the size you require it is suggested to go up one size as these garments tend to fit small

* These refer to actual body measurements plus any clothes you may where under the garment.
Chest size is taken at the fullest point of the chest, keeping tape under arms and around shoulder blades.
This measurement should be taken with the person wearing  the actual garments that will be used used under the jacket such as a coverall for example.

 * Please note the weight row is provided as a best guess option and should only be used when this is the only measurement provided.
Please phone customer service at 1-888-440-4668 if you require assistance. 


Jacket Colours Shown Below
  

Write Your Own Review
You're reviewing:Insulated FR Jacket Journeyman 300D Trilobal Rip-Stop - 3907FRWJ
Your Rating